Stainless Steel Plate & Sheet Supplier

Available in standard and custom sizes for precise fit. For cost-effective interior decoration, the 201 brushed stainless steel sheet in HL finish is a popular choice. Each order can be supported with inspection documentation and quality records for traceability.

The most referenced size in global procurement is the 4×8 ft sheet (1,219 × 2,438 mm), available in 304, 316, and 430 grades across thicknesses from 0.5 mm to 12 mm. Standard 4×8 sheets ship from stock. For non-standard dimensions and cut-to-length orders, we cut to your drawing with ±0.5 mm length tolerance to reduce fabrication waste. Minimum order quantities and lead times vary by grade and thickness — contact us for current stock availability and pricing.

Grade selection depends on four variables: corrosion environment, temperature range, fabrication method, and surface appearance requirement.

304 Stainless Steel Sheet — The industry standard for general-purpose use. FDA-compliant for food contact, weldable, and available in 2B, BA, brushed (No.4 / HL), and mirror finishes. Best suited for indoor architecture, food processing equipment, HVAC, and applications with no chloride exposure above ambient levels.

316 / 316L Stainless Steel Sheet — Molybdenum addition improves chloride and acid resistance. Specify 316 for marine structures, coastal cladding, chemical vessels, and medical devices. Specify 316L (low carbon) when post-weld corrosion resistance is required without post-weld heat treatment.

430 Stainless Steel Sheet — Ferritic, magnetic, and approximately 30% lower cost than 304. Suitable for indoor decorative applications, appliance panels, and environments with no chloride exposure. Not recommended for structural or outdoor use.

904L Stainless Steel Sheet — Super austenitic grade for aggressive acid environments including sulfuric and phosphoric acid. Used in chemical processing plants, FGD systems, and desalination equipment.

2205 Duplex Sheet — Twice the yield strength of 304 with superior resistance to stress corrosion cracking. Specified for pressure vessels, heat exchangers, offshore structural components, and storage tanks handling chloride-containing fluids.

Not sure which grade fits your environment and fabrication process? Send us your project conditions — corrosive media, operating temperature, and surface finish requirement — and we will recommend the appropriate grade with supporting material data.